Our Amplifiers utilize Class D amplification. D-Class chips offer superb power but suffer from micro phonics (noise). Only when the chip is isolated from disturbances can its virtues be truly experienced. The correct combination of design and elements house this chip for a clean, superior amplified performance. The use of simple circuit design ensures low intrinsic noise, high linearity of amplification, and minimal dynamic distortion. We also build all of our Pre-Amplifier circuits by hand, which eliminates problems caused by stray capacitances inherent within standard PCB manufacturing.

“Tri-Art [was] showing a woodworking feast of natural bamboo and extremely natural sound.”

6 Moons (2017)

B-Series Passive Pre-Amplifier

Passive isolating transformers for balanced signal output eliminate hum and buzz associated with ground loops. They help to extend frequency response and are shielded in Mu-METAL to protect against external magnetic fields and prevent contamination due to ultrasonic and RF interference. Both, RCA’s and balanced outputs benefits from that.

Details

  • 12 Volt DC 5 Amp, Linear Tube Buffered
  • Inputs Transformer Balanced, 5 RCA, 1 Balanced XLR
  • Outputs Transformer Balanced, 2 RCA, 1 Balanced XLR
  • ALPS “Blue Velvet” Shunt Resistor Design, 2 Nude Vishay Custom Resistors per Channel

  • Bamboo Cabinet, Features Acoustic ‘Waffling’ to Break Up Sound Waves, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate, Internal Pair of Supertweeters to Break Up Internal Box Resonances

  • Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
  • Sorbothane® Paded Bamboo Cup Isolation Feet
  • Bamboo and Hand-Brushed Aluminium Encased Volume Remote Control
  • External B-Series DC12V Linear (Tube Buffer) Power Supply Included (For More Details See Auxiliary Devices)

Dimensions and Weight

  • Dimensions H 16.0cm W 23.5cm D 32.5cm Weight 3.4kg
  • Shipping Dimensions H 34.5cm W 38.5cm D 63.5 – 0.084m² Weight 5.0kg

B-Series Passive Pre-Amplifier (Art. No. 7217) Price 1,855.00 €*

B-Series 60W Stereo Power Amplifier

Details

  • 60W per Channel Continuous @ 8Ω
  • 24V DC 5 Amp, Linear Tube Buffered
  • Class D, Single Ended
  • Inputs 1 RCA, 1 Balanced XLR
  • Speaker Output 5-Way Binding Post
  • Bamboo Cabinet, Features Acoustic ‘Waffling’ to Break Up Sound Waves, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate, Internal Pair of Supertweeters to Break Up Internal Box Resonances
  • Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
  • Sorbothane® Paded Bamboo Cup Isolation Feet
  • External B-Series DC24V Linear (Tube Buffer) Power Supply Included (For More Details See Auxiliary Devices)

Dimensions and Weight

  • Dimensions H 16.0cm W 23.5cm D 32.5cm Weight 3.7kg
  • Shipping Dimensions H 34.5cm W 38.5cm D 63.5 – 0.084m² Weight 5.3kg

B-Series 60W Stereo Power Amplifier (Art. No. 9396) Price 2,870.00 €*

B-Series 60W Stereo Integrated Amplifier

Our Amplifiers utilize Class D amplification. The D-Class chips offer superb power but suffer from micro phonics (noise). Only when the chip is isolated from disturbances can its virtues be truly experienced. The correct combination of design and material house this chip for a clean, superior amplified performance.

Details

  • 60W per Channel Continuous @ 8Ω
  • 24V DC 5 Amp, Linear Tube Buffered
  • Class D, Single Ended
  • Inputs 3 RCA
  • Speaker Output 5-Way Binding Post
  • Pre-Amp Section ALPS “Blue Velvet” Shunt Resistor Design, 2 Nude Vishay Custom Resistors per Channel
  • Bamboo Cabinet, Features Acoustic ‘Waffling’ to Break Up Sound Waves, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate, Internal Pair of Supertweeters to Break Up Internal Box Resonances
  • Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
  • Sorbothane® Paded Bamboo Cup Isolation Feet
  • Bamboo and Hand-Brushed Aluminium Encased Volume Remote Control
  • External B-Series DC24V Linear (Tube Buffer) Power Supply Included (For More Details See Auxiliary Devices)

Dimensions and Weight

  • Dimensions H 16.0cm W 23.5cm D 32.5cm Weight 3.8kg
  • Shipping Dimensions H 34.5cm W 38.5cm D 63.5 – 0.084m² Weight 5.4kg

B-Series 60W Stereo Integrated Amplifier (Art. No. 10683) Price 3,715.00 €*

P-Series 35W Stereo Receiver

The P-Series 35 Watt Class D Receiver is an all-in-one integrated amplifier of unique design. To prevent unnecessary power consumption it features separate power toggle switches for each function (Bluetooth, FM, DAC and Headphone Amp).

Details

  • 35W per Channel Continuous @ 8Ω
  • 24V DC 5 Amp
  • Class D, Single Ended
  • Inputs 3 RCA, 1 USB (2.0 Type-B) <-toggle switch->1 RCA
  • Output Headphone Amp with 6.3mm (1/4″) Jack (For More Details See S-Series Headphone Amp)
  • Speaker Output 5-Way Binding Post
  • Pre-Amp Section ALPS “Blue Velvet” Shunt Resistor Design
  • Selector Features Separate Power Switches to Prevent Unnecessary Power Consumption for following Function
  • Built-in Bluetooth Support
  • FM Tuner with External Remote Volume Control and RCA Antennae
  • S/PDIF DAC Support (For More Details See Below)
  • Bamboo Cabinet, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate
  • Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
  • Sorbothane® Paded Bamboo Cup Isolation Feet
  • Bamboo and Hand-Brushed Aluminium Encased Volume Remote Control

S/PDIF DAC Support Specification

  • Savitech SA9037 USB Audio Processor
  • AKM AK4490 High Performance DAC
  • TI TPA6120A Dual Channel High Power Amplifier
  • USB Audio Class 1.0 24Bit/96KHz
  • High Voltage Output at 4.88Vrms Line Output
  • High Power Output at 2 x 350mW Low Impedance Output
  • 0.5dB/Step Digital Attenuation
  • 4 EQ Curve Settings (4 Digital Filter Settings for System Tuning)
    • LED Off Short Delay Sharp Roll Off
    • LED Red Short Delay Slow Roll Off
    • LED Blue Short Roll Off
    • LED Purple Sharp Roll Off

Dimensions and Weight

  • Dimensions H 16.0cm W 28.5cm D 20.0cm Weight 3.3kg
  • Shipping Dimensions H 34.5cm W 38.5cm D 63.5cm – 0.000m² Weight 4.9kg

P-Series 35W Stereo Receiver (Art. No. 10686) Price 1,475.00 €*

P-Series 35W Stereo Integrated Amplifier

Details

  • 35W per Channel Continuous @ 8Ω
  • 24V DC 5 Amp
  • Class D, Single Ended
  • Inputs 3 RCA
  • Output Headphone Amp with 6.3mm (1/4″) Jack (For More Details See S-Series Headphone Amp)
  • Speaker Output 5-Way Binding Post
  • Pre-Amp Section ALPS “Blue Velvet” Shunt Resistor Design
  • Bamboo Cabinet, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate
  • Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
  • Sorbothane® Paded Bamboo Cup Isolation Feet
  • Bamboo and Hand-Brushed Aluminium Encased Volume Remote Control

Dimensions and Weight

  • Dimensions H 16.0cm W 28.5cm D 20.0cm Weight 3.1kg 
  • Shipping Dimensions H 34.5cm W 38.5cm D 63.5cm – 0.000m² Weight 4.9kg

P-Series 35W Stereo Amplifier (Art. No. 20574) Price 1,055.00 €*

 

S-Series 25W Stereo Integrated Amplifier

Details

  • 25W per Channel Continuous @ 8Ω
  • 12V DC 5 Amp
  • Class D, Single Ended
  • Input 1 RCA
  • Speaker Output 5-Way Binding Post
  • Pre-Amp Section ALPS “Blue Velvet” Shunt Resistor Design
  • Bamboo Cabinet, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate
  • Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
  • Felt Pad Feet
  • Remote Volume Control

Dimensions and Weight

  • Dimensions H 12.0cm W 12.5cm D 11.5cm Weight 1.0kg
  • Shipping Dimensions H 00.0cm W 00.cm D 00.0cm – 0.000m² Weight 0.0kg

S-Series 25W Stereo Amplifier (Art. No. 30698) Price 530.00 €*

* Prices are subject to change without any prior notice due to the exchange rate fluctuation. 20% VAT included!